Google

วันอังคารที่ 15 มกราคม พ.ศ. 2551

สัมผัสแห่งความแรงในการโอนถ่ายข้อมูลบนฮาร์ดดิสก์ // SATA


สัมผัสแห่งความแรงในการโอนถ่ายข้อมูลบนฮาร์ดดิสก์


ในการใช้งานคอมพิวเตอร์ นอกจากความเร็วจากซีพียู หน่วยความจำแล้ว สิ่งหนึ่งที่มีผลกับความเร็วในการทำงานในส่วนของการโอนถ่ายไฟล์คือความเร็วในการเชื่อมต่อกับฮาร์ดดิสก์ ซึ่งในสมัยก่อนนั้น ไฟล์มีขนาดเล็ก ไม่ต้องการการโอนถ่ายข้อมูลมากนัก มีเพียงเอกสาร ข้อความ ขนาดเพียงไม่กี่กีโลไบต์เท่านั้น แต่สำหรับในปัจจุบัน มีการโอนถ่ายข้อมูลที่มีขนาดใหญ่ เราคงหงุดหงิดกับการเสียเวลารอในการค้นหา คัดลอก ย้ายข้อมูลที่มีขนาดใหญ่ เช่น อัลบั้มเพลง อัลบัมภาพ ไฟล์ภาพยนตร์ มิวสิควีดีโอ หรือแม้กระทั่งการทำงานกับไฟล์มัลติมีเดียต่างๆ ยิ่งต้องใช้เวลาในการโอนถ่ายข้อมูลมากขึ้น เนื่องจากไฟล์มีขนาดใหญ่ จึงได้มีการพัฒนาความเร็วในการเชื่อมต่อฮาร์ดดิกส์มาโดยตลอด สำหรับในสมัยก่อนนั้นจะมีรูปแบบการเชื่อมต่อแบบ IDE66 (CD-ROM) IDE100 จากนั้นพัฒนาเป็น ATA133 (เราอาจเรียกว่า PATA คือ Parallel ATA) ซึ่งจะมีส่วนประกอบในการติดตั้งคือ สายแพร และสายไฟ และปัจจุบันกับรูปแบบการเชื่อมต่อแบบใหม่ SATA ที่เมนบอร์ดรุ่นใหม่ๆ ต่างรองรับการเชื่อมต่อแบบนี้กันทั้งสิ้น ซึ่งจะเป็นการเชื่อมต่อโดยสายสีแดงๆเพียงเส้นเดียว และมีขนาดเล็ก บาง ทำให้ไม่เกะกะและสามารถระบายความร้อนในตัวเคส ได้ีเป็นอย่างดีอีกด้วย โดยการเชื่อมต่อแบบ SATA นั้น เริ่มแรกได้มีการพัฒนาความเร็วในการโอนถ่ายข้อมูล ที่ 1.5Gb/s จากนั้นพัฒนาเพิ่มความเร็วเป็น 2 เท่าคือ SATAII ด้วยความเร็ว ในการโอนถ่ายข้อมูลที่ 3Gb/s จะเห็นได้ว่ามีความเร็วในการโอนถ่ายข้อมูลสูงกว่าแบบเดิมคือ IDE อยู่มากทีเดียว ปัจจุบันการเชื่อมต่อแบบ IDE ผู้ผลิตเมนบอร์ดทั้งหลายต่างก็รองรับการเชื่อมต่อฮาร์ดดิสก์แบบ SATA และ SATAII ส่วน ATA หรือ IDE นั้นยกตำแหน่งให้กับ DVD-Rom/DVD-RW หรือ CD-Rom แทน SATA 6Gb/s ทาง SATA-IO วางแผนที่จะสร้างมาตรฐานใหม่กับการเชื่อมต่อ SATA 6Gb/s ซึ่งแน่นอนว่าฮาร์ดดิสก์ในปัจจุบันได้รับการพัฒนาขนาดความจุมากถึง 750GB และเกือบจะเตะ 1 เทราไบต์แล้ว (หากเทียบการคำณวน 1024KB = 1MB 1024MB = 1GB 1024GB = 1 Terabytes) ยิ่งขนาดความจุของฮาร์ดดิสก์สูงขึ้นเรื่อยๆตามความต้องการของซอฟต์แวร์และการบันทึกข้อมูลแบบดิจิตอล ทั้งภาพ เสียง มัลติมีเดียแล้วรับรองว่าการพัฒนาฮาร์ดดิสก์จะต้องเพิ่มขีดความสามารถ ในการทำงานให้รองรับการโอนถ่ายไฟล์ขนาดใหญ่ๆได้โดยใช้เวลาไม่นาน มิฉะนั้นการคัดลอกไฟล์ใหญ่ๆคงจะต้องใช้เวลานานจนผู้ใช้เบื่อไปเลยก็ได้ (เปรียบเทียบจากแผ่น DVD ขนาดความจุ 4.7 GB ที่ได้รับความนิยมมาก ทำให้คาดเดาได้ว่า การบันทึกข้อมูลในปัจจุบันนั้น ขนาดความจุ 4 GB นี่เป็นเรื่องเล็กๆไปแล้ว (ปกติแผ่นซีดี 700MB ปัจจุบันนับว่าความจุน้อยมากๆเมื่อเทียบกับสมัยก่อนที่ยังใช้ Floppy Disk ขนาด 1.44 MB อยู่) แน่นอนว่าเราจะก้าวไปสู่ระดับเทราไบต์ในไม่ช้านี้

วันเสาร์ที่ 29 กันยายน พ.ศ. 2550

Compact Disc



A Compact Disc or CD is an optical disc used to store digital data, originally developed for storing digital audio. The CD, available on the market since late 1982, remains the standard playback medium for commercial audio recordings to the present day, although it has lost ground in recent years to MP3 players, which have greater storage capability.
An audio CD consists of one or more stereo tracks stored using 16-bit PCM coding at a sampling rate of 44.1 kHz. Standard CDs have a diameter of 120 mm and can hold approximately 80 minutes of audio. There are also 80 mm discs, sometimes used for CD singles, which hold approximately 20 minutes of audio. The technology was later adapted for use as a data storage device, known as a CD-ROM, and to include record-once and re-writable media (CD-R and CD-RW respectively). CD-ROMs and CD-Rs remain widely used technologies in the computer industry as of 2007. The CD and its extensions have been extremely successful: in 2004, the worldwide sales of CD audio, CD-ROM, and CD-R reached about 30 billion discs. By 2007, 200 billion CDs had been sold worldwide.

History

In 1979, Philips and Sony set up a joint task force of engineers to design a new digital audio disc. The task force, led by prominent members Kees Immink and Toshitada Doi, progressed the research into laser technology and optical discs that had been started by Philips in 1977. After a year of experimentation and discussion, the taskforce produced the Red Book, the Compact Disc standard. Philips contributed the general manufacturing process, based on video LaserDisc technology. Philips also contributed Eight-to-Fourteen Modulation (EFM), which offers both a long playing time and a high resilience against disc defects such as scratches and fingerprints, while Sony contributed the error-correction method, CIRC. The Compact Disc Story,told by a former member of the taskforce, gives background information on the many technical decisions made, including the choice of the sampling frequency, playing time, and disc diameter. According to Philips, the Compact Disc was thus "invented collectively by a large group of people working as a team."
The first Compact Disc for commercial release rolled off the assembly line on August 17, 1982, at a Philips factory in Langenhagen, near Hanover, Germany. The first title released was ABBA's The Visitors (1981).CDs reached the market in late 1982 in Asia, and early the following year in the United States and other markets. This event is often seen as the "Big Bang" of the digital audio revolution. The new audio disc was enthusiastically received, especially in the early-adopting classical music and audiophile communities and its handling quality received particular praise. As the price of players sank rapidly, the CD began to gain popularity in the larger popular and rock music markets. The first artist to sell a million copies on CD was Dire Straits, with their 1985 album Brothers in Arms.
The CD was originally thought of as an evolution of the gramophone record, rather than primarily as a data storage medium. Only later did the concept of an "audio file" arise, and the generalising of this to any data file. From its origins as a music format, Compact Disc has grown to encompass other applications. In June 1985, the CD-ROM (read-only memory) and, in 1990, CD-Recordable were introduced, also developed by Sony and Philips.
While CDs are significantly more durable than earlier audio formats, they are susceptible to damage from daily usage and environmental factors. Libraries and archives should enact optical media preservation procedures to ensure continued usability.


From Wikipedia, the free encyclopedia

วันศุกร์ที่ 28 กันยายน พ.ศ. 2550

DVD

DVD
From Wikipedia, the free encyclopedia

DVD (also known as "Digital Versatile Disc" and "Digital Video Disc") is a popular optical disc storage media format used for data storage. Its main uses are for movies, software, and data archiving. Most DVDs are of the same dimensions as compact discs (CDs) but store more than 6 times the data.

The term DVD is used in describing three ways that data is stored on the disks — DVD-ROM has data which can only be read and not written, DVD-R can be written once and then functions as a DVD-ROM, and DVD-RAM holds data that can be re-written multiple times.

DVD-Video and DVD-Audio discs respectively refer to properly formatted and structured video and audio content. Everything else, including other types of DVD discs with video content, is referred to as a DVD-Data disc. DVD is also used generically to refer to HD (High Density) video disc formats Blu-ray and HD DVD.

History

In the early 1990s two high-density optical storage standards were being developed; one was the MultiMedia Compact Disc, backed by Philips and Sony, and the other was the Super Density disc, supported by Toshiba, Time Warner, Matsushita Electric, Hitachi, Mitsubishi Electric, Pioneer, Thomson, and JVC. IBM's president, Lou Gerstner, acting as a matchmaker, led an effort to unite the two camps behind a single standard, anticipating a repeat of the costly videotape format war between VHS, Betamax and Video 2000 in the 1980s.

Philips and Sony abandoned their MultiMedia Compact Disc and fully agreed upon Toshiba's SuperDensity Disc with only one modification, namely changing to EFMPlus modulation. EFMPlus was chosen as it has a great resilience against disc damage such as scratches and fingerprints. EFMPlus, created by Kees Immink, who also designed EFM, is 6% less efficient than the modulation technique originally used by Toshiba, which resulted in a capacity of 4.7 GB as opposed to the original 5 GB. The result was the DVD specification, finalized for the DVD movie player and DVD-ROM computer applications in December 1995.[1] In May 1997, the DVD Consortium was replaced by the DVD Forum, which is open to all other companies.

Etymology

"DVD" was originally used as an initialism for the unofficial term "digital videodisk".[2] It was reported in 1995, at the time of the specification finalization, that the letters officially stood for "digital versatile disc" (due to non-video applications),[3] however, the text of the press release announcing the specification finalization only refers to the technology as "DVD", making no mention of what (if anything) the letters stood for.[1] A newsgroup FAQ written by Jim Taylor (a prominent figure in the industry) claims that four years later, in 1999, the DVD Forum stated that the format name was simply the three letters "DVD" and did not stand for anything.[4] The official DVD specification documents have never defined DVD. Usage in the present day varies, with "DVD", "Digital Video Disc", and "Digital Versatile Disc" all being common.

วันศุกร์ที่ 31 สิงหาคม พ.ศ. 2550

Internet Connection by WiFi

Wi-Fi
Wi-Fi is a wireless technology brand owned by the Wi-Fi Alliance intended to improve the interoperability of wireless local area network products based on the IEEE 802.11 standards.Common applications for Wi-Fi include Internet and VoIP phone access, gaming, and network connectivity for consumer electronics such as televisions, DVD players, and digital cameras.DefinitionAccording to the brand style guide of the Wi-Fi Alliance (the owner of the Wi-Fi brand):"Products which successfully pass the Wi-Fi Alliance testing may use the Wi-Fi CERTIFIED brand. The Alliance tests and certifies the interoperability of wireless LAN products based on the IEEE 802.11 standards. Studies show that 88% of consumers prefer products which have been tested by an independent organization."Wi-Fi technologies have gone through several generations since their inception in 1997. Wi-Fi is supported to different extents under Microsoft Windows, Apple Mac OS and open source Unix and Linux operating systems. Contrary to popular belief, Wi-Fi is not an abbreviation for "Wireless Fidelity" (see "Origin and meaning of the term "Wi-Fi"" below).
Uses
A Wi-Fi enabled device such as a PC, cell phone or PDA can connect to the Internet when within range of a wireless network connected to the Internet. The area covered by one or several interconnected access points is called a hotspot. Hotspots can cover as little as a single room with wireless-opaque walls or as much as many square miles covered by overlapping access points. Wi-Fi can also be used to create a mesh network. Both architectures are used in community networks.[citation needed]Wi-Fi also allows connectivity in peer-to-peer (wireless ad-hoc network) mode, which enables devices to connect directly with each other. This connectivity mode is useful in consumer electronics and gaming applications.When the technology was first commercialized there were many problems because consumers could not be sure that products from different vendors would work together. The Wi-Fi Alliance began as a community to solve this issue so as to address the needs of the end user and allow the technology to mature. The Alliance created the branding Wi-Fi CERTIFIED to show consumers that products are interoperable with other products displaying the same branding.Many consumer devices use Wi-Fi. Amongst others, personal computers can network to each other and connect to the Internet, mobile computers can connect to the Internet from any Wi-Fi hotspot, and digital cameras can transfer images wirelessly.Routers which incorporate a DSL or cable modem and a Wi-Fi access point are often used in homes and other premises, and provide Internet access and internetworking to all devices connected wirelessly or by cable into them. Devices supporting Wi-Fi can also be connected in ad-hoc mode for client-to-client connections without a router.Business and industrial Wi-Fi is widespread as of 2007. In business environments, increasing the number of Wi-Fi access points provides redundancy, support for fast roaming and increased overall network capacity by using more channels or creating smaller cells. Wi-Fi enables wireless voice applications (VoWLAN or WVOIP). Over the years, Wi-Fi implementations have moved toward 'thin' access points, with more of the network intelligence housed in a centralized network appliance, relegating individual Access Points to be simply 'dumb' radios. Outdoor applications may utilize true mesh topologies. As of 2007 Wi-Fi installations can provide a secure computer networking gateway, firewall, DHCP server, intrusion detection system, and other functions.In addition to restricted use in homes and offices, Wi-Fi is publicly available at Wi-Fi hotspots provided either free of charge or to subscribers to various providers. Free hotspots are often provided by businesses such as hotels, restaurants, and airports who offer the service to attract or assist clients. Sometimes free Wi-Fi is provided by enthusiasts, or by organisations or authorities who wish to promote business in their area. Metropolitan-wide WiFi (Mu-Fi) already has more than 300 projects in process.

Advantages of Wi-Fi
Wi-Fi allows LANs to be deployed without cabling for client devices, typically reducing the costs of network deployment and expansion. Spaces where cables cannot be run, such as outdoor areas and historical buildings, can host wireless LANs.As of 2007 wireless network adapters are built into most modern laptops. The price of chipsets for Wi-Fi continues to drop, making it an economical networking option included in ever more devices. Wi-Fi has become widespread in corporate infrastructures, which also helps with the deployment of RFID technology that can piggyback on Wi-Fi [2].Different competitive brands of access points and client network interfaces are inter-operable at a basic level of service. Products designated as "Wi-Fi Certified" by the Wi-Fi Alliance are backwards inter-operable. Wi-Fi is a global set of standards. Unlike mobile telephones, any standard Wi-Fi device will work anywhere in the world.Wi-Fi is widely available in more than 250,000 public hotspots and tens of millions of homes and corporate and university campuses worldwide. WPA is not easily cracked if strong passwords are used and WPA2 encryption has no known weaknesses. New protocols for Quality of Service (WMM) make Wi-Fi more suitable for latency-sensitive applications (such as voice and video), and power saving mechanisms (WMM Power Save) improve battery operation.
Disadvantages of Wi-Fi
Spectrum assignments and operational limitations are not consistent worldwide. Most of Europe allows for an additional 2 channels beyond those permitted in the US (1-13 vs 1-11); Japan has one more on top of that (1-14), and some countries, like Spain, prohibit use of the lower-numbered channels. Europe, as of 2007, is now essentially homogeneous in this respect. Some countries, such as Italy, formerly required a 'general authorization' for any Wi-Fi used outside an operator's own premises, or require something akin to an operator registration.[citation needed] Equivalent isotropically radiated power (EIRP) in the EU is limited to 20 dBm (0.1 W).Power consumption is fairly high compared to some other low-bandwidth standards, such as Zigbee and Bluetooth, making battery life a concern.

The most common wireless encryption standard, Wired Equivalent Privacy or WEP, has been shown to be easily breakable even when correctly configured. Wi-Fi Protected Access (WPA and WPA2), which began shipping in 2003, aims to solve this problem and is now available on most products.
Wi-Fi Access Points typically default to an open (encryption-free) mode. Novice users benefit from a zero-configuration device that works out of the box, but without security enabled, providing open wireless access to their LAN. To turn security on requires the user to configure the device, usually via a software graphical user interface (GUI). Wi-Fi networks that are open (unencrypted) can be monitored and used to read and copy data (including personal information) transmitted over the network, unless another security method is used to secure the data, such as a VPN or a secure web page. (HTTPS/Secure Socket Layer)Many 2.4 GHz 802.11b and 802.11g Access points default to the same channel on initial startup, contributing to congestion on certain channels.
To change the channel of operation for an access point requires the user to configure the device.Wi-Fi networks have limited range. A typical Wi-Fi home router using 802.11b or 802.11g with a stock antenna might have a range of 45 m (150 ft) indoors and 90 m (300 ft) outdoors. Range also varies with frequency band. Wi-Fi in the 2.4 GHz frequency block has slightly better range than Wi-Fi in the 5 GHz frequency block. Outdoor range with improved (directional) antennas can be several kilometres or more with line-of-sight.Wi-Fi pollution, or an excessive number of access points in the area, especially on the same or neighboring channel, can prevent access and interfere with the use of other access points by others, caused by overlapping channels in the 802.11g/b spectrum, as well as with decreased signal-to-noise ratio (SNR) between access points. This can be a problem in high-density areas, such as large apartment complexes or office buildings with many Wi-Fi access points. Additionally, other devices use the 2.4 GHz band: microwave ovens, cordless phones, baby monitors, security cameras, and Bluetooth devices can cause significant additional interference. General guidance to those who suffer these forms of interference or network crowding is to migrate to a WiFi 5GHz product (802.11a) usually a dual band product as the 5GHZ band is relatively unused and there are many more channels available. This also requires users to set up the 5GHz band to be the preffered network in the client and to configure each network band to a different name(SSID).It is also an issue when municipalities[3], or other large entities such as universities, seek to provide large area coverage. Everyone is considered equal for the base standard without 802.11e/WMM when they use the band. This openness is also important to the success and widespread use of 2.4 GHz Wi-Fi, but makes it unsuitable for "must-have" public service functions or where reliability is required.Interoperability issues between brands or proprietary deviations from the standard can disrupt connections or lower throughput speeds on other user's devices that are within range. Additionally, Wi-Fi devices do not, as of 2007, pick channels to avoid interference.[citation needed]Standard DevicesWireless access points connects a group of wireless devices to an adjacent wired LAN. An access point is similar to an ethernet hub, relaying data between connected wireless devices in addition to a (usually) single connected wired device, most often an ethernet hub or switch, allowing wireless devices to communicate with other wired devices.Wireless adapters allow devices to connect to a wireless network. These adapters connect to devices using various external or internal interconnects such as PCI, miniPCI, USB, ExpressCard, Cardbus and PC card. Most newer laptop computers are equipped with internal adapters.
Internal cards are generally more difficult to install.Wireless routers integrate WAP, ethernet switch, and internal Router firmware application that provides IP Routing, NAT, and DNS forwarding through an integrated WAN interface. A wireless router allows wired and wireless ethernet LAN devices to connect to a (usually) single WAN device such as cable modem or DSL modem.
A wireless router allows all three devices (mainly the access point and router) to be configured through one central utility. This utility is most usually an integrated web server which serves web pages to wired and wireless LAN clients and often optionally to WAN clients. This utility may also be an application that is run on a desktop computer such as Apple's AirPort.Wireless Ethernet bridges connect a wired network to a wireless network. This is different from an access point in the sense that an access point connects wireless devices to a wired network at the data-link layer. Two wireless bridges may be used to connect two wired networks over a wireless link, useful in situations where a wired connection may be unavailable, such as between two separate homes.Wireless range extenders or wireless repeaters can extend the range of an existing wireless network. Range extenders can be strategically placed to elongate a signal area or allow for the signal area to reach around barriers such as those created in L-shaped corridors. Wireless devices connected through repeaters will suffer from an increased latency for each hop. Additionally, a wireless device at the end of chain of wireless repeaters will have a throughput that is limited by the weakest link within the repeater chain.Most commercial devices (routers, access points, bridges, repeaters) designed for home or business environments use either RP-SMA or RP-TNC antenna connectors. PCI wireless adapters also mainly use RP-SMA connectors. Most PC card and USB wireless only have internal antennas etched on their printed circuit board while some have MMCX connector or MC-Card external connections in addition to an internal antenna. A few USB cards have a RP-SMA connector. Most Mini PCI wireless cards utilize Hirose U.FL connectors, but cards found in various wireless appliances contain all of the connectors listed. Many high-gain (and homebuilt antennas) utilize the Type N connector more commonly used by other radio communications methods.

Internet Access by ADSL

ADSL (Asymmetric Digital Subscriber Line)
Asymmetric Digital Subscriber Line (ADSL) is a form of DSL, a data communications technology that enables faster data transmission over copper telephone lines than a conventional voiceband modem can provide. It does this by utilizing frequencies that are not used by a voice telephone call. A splitter or micro filters allow a single telephone connection to be used for both ADSL service and voice calls at the same time. Because phone lines vary in quality and weren't initially provisioned with ADSL in mind, it can generally only be used over short distances, typically less than 5 km
At the telephone exchange the line generally terminates at a DSLAM where another frequency splitter separates the voice band signal for the conventional phone network. Data carried by the ADSL is typically routed over the telephone company's data network and eventually reaches a conventional internet network.
Explanation
The distinguishing characteristic of ADSL over other forms of DSL is that the volume of data flow is greater in one direction than the other, i.e. it is asymmetric. Providers usually market ADSL as a service for consumers to connect to the Internet in a relatively passive mode: able to use the higher speed direction for the "download" from the Internet but not needing to run servers that would require high speed in the other direction.
There are both technical and marketing reasons why ADSL is in many places the most common type offered to home users. On the technical side, there is likely to be more crosstalk from other circuits at the DSLAM end (where the wires from many local loops are close together) than at the customer premises. Thus the upload signal is weakest at the noisiest part of the local loop, while the download signal is strongest at the noisiest part of the local loop. It therefore makes technical sense to have the DSLAM transmit at a higher bit rate than does the modem on the customer end. Since the typical home user in fact does prefer a higher download speed, the telephone companies chose to make a virtue out of necessity, hence ADSL. On the marketing side, limiting upload speeds limits the attractiveness of this service to business customers, often causing them to purchase higher cost Digital Signal 1 services instead. In this fashion, it segments the digital communications market between business and home users.

Internet Connection by broadband internet access

Broadband Internet access
Broadband Internet access, often shortened to just "broadband", is high speed Internet access—typically contrasted with dial-up access over modem.Dial-up modems are generally only capable of a maximum bitrate of 56 kbit/s (kilobits per second) and require the full use of a telephone line—whereas broadband technologies supply at least double this speed and generally without disrupting telephone use.Although various minimum speeds have been used in definitions of broadband, ranging up from 64 kbit/s up to 1.0 Mbit/s, the OECD Broadband Statistics report is typical in counting only download speeds equal to or faster than 256 kbit/s as broadband, and the US FCC use 200 kbit/s in their definition.Speeds are defined in terms of maximum download because several common consumer broadband technologies such as ADSL are "asymmetric" - supporting much slower upload speeds than download."Broadband penetration" is now treated as a key economic indicator
Overview
Broadband is often called high-speed Internet, because it usually has a high rate of data transmission. In general, any connection to the customer of 256 kbit/s (0.256 Mbit/s) or more is considered broadband Internet. The International Telecommunication Union Standardization Sector (ITU-T) recommendation I.113 has defined broadband as a transmission capacity that is faster than primary rate ISDN, at 1.5 to 2 Mbit/s. The FCC definition of broadband is 200 kbit/s (0.2 Mbit/s) in one direction, and advanced broadband is at least 200 kbit/s in both directions. The Organization for Economic Co-operation and Development (OECD) has defined broadband as 256 kbit/s in at least one direction and this bit rate is the most common baseline that is marketed as "broadband" around the world. There is no specific bitrate defined by the industry, however, and "broadband" can mean lower-bitrate transmission methods. Some Internet Service Providers (ISPs) use this to their advantage in marketing lower-bitrate connections as broadband.In practice, the advertised bandwidth is not always reliably available to the customer; ISPs often allow a greater number of subscribers than their backbone connection can handle, under the assumption that most users will not be using their full connection capacity very frequently. This aggregation strategy works more often than not, so users can typically burst to their full bandwidth most of the time; however, peer-to-peer (P2P) file sharing systems, often requiring extended durations of high bandwidth, stress these assumptions, and can cause major problems for ISPs who have excessively overbooked their capacity. For more on this topic, see traffic shaping. As takeup for these introductory products increases, telcos are starting to offer higher bit rate services. For existing connections, this most of the time simply involves reconfiguring the existing equipment at each end of the connection.As the bandwidth delivered to end users increases, the market expects that video on demand services streamed over the Internet will become more popular, though at the present time such services generally require specialized networks. The data rates on most broadband services still do not suffice to provide good quality video, as MPEG-2 video requires about 6 Mbit/s for good results. Adequate video for some purposes becomes possible at lower data rates, with rates of 768 kbit/s and 384 kbit/s used for some video conferencing applications, and rates as low as 100 kbit/s used for videophones using H.264/MPEG-4 AVC. The MPEG-4 format delivers high-quality video at 2 Mbit/s, at the high end of cable modem and ADSL performance.Increased bandwidth has already made an impact on newsgroups: postings to groups such as alt.binaries.* have grown from JPEG files to entire CD and DVD images. According to NTL, the level of traffic on their network increased from a daily inbound news feed of 150 gigabytes of data per day and 1 terabyte of data out each day in 2001 to 500 gigabytes of data inbound and over 4 terabytes out each day in 2002
Technology
The standard broadband technologies in most areas are DSL and cable modems. Newer technologies in use include VDSL and pushing optical fiber connections closer to the subscriber in both telephone and cable plants. Fiber-optic communication, while only recently being used in fiber to the premises and fiber to the curb schemes, has played a crucial role in enabling Broadband Internet access by making transmission of information over larger distances much more cost-effective than copper wire technology. In a few areas not served by cable or ADSL, community organizations have begun to install Wi-Fi networks, and in some cities and towns local governments are installing municipal Wi-Fi networks. As of 2006, high speed mobile Internet access has become available at the consumer level in some countries, using the HSDPA and EV-DO technologies. The newest technology being deployed for mobile and stationary broadband access is WiMAX

Internet Connection by Satellite internet

Satellite Internet
This employs a satellite in geostationary orbit to relay data from the satellite company to each customer. Satellite Internet is usually among the most expensive ways of gaining broadband Internet access, but in rural areas it may only compete with cellular broadband. However, costs have been coming down in recent years to the point that it is becoming more competitive with other high-speed options.Satellite Internet also has a high latency problem caused by the signal having to travel 35,000 km (22,000 miles) out into space to the satellite and back to Earth again. The signal delay can be as much as 500 milliseconds to 900 milliseconds, which makes this service unsuitable for applications requiring real-time user input such as certain multiplayer Internet games and first-person shooters played over the connection. Despite this, it is still possible for many games to still be played, but the scope is limited to real-time strategy or turn-based games. The functionality of live interactive access to a distant computer can also be subject to the problems caused by high latency. These problems are more than tolerable for just basic email access and web browsing and in most cases are barely noticeable.There is no simple way to get around this problem. The delay is primarily due to the speed of light being only 300,000 km/second (186,000 miles per second). Even if all other signaling delays could be eliminated it still takes the electromagnetic wave 233 milliseconds to travel from ground to the satellite and back to the ground, a total of 70,000 km (44,000 miles) to travel from you to the satellite company.Since the satellite is usually being used for two-way communications, the total distance increases to 140,000 km (88,000 miles), which takes a radio wave 466 ms to travel. Factoring in normal delays from other network sources gives a typical connection latency of 500-700 ms. This is far worse latency than even most dial-up modem users' experience, at typically only 150-200 ms total latency.Most satellite Internet providers also have a FAP (Fair Access Policy). Perhaps one of the largest cons against satellite Internet, these FAPs usually throttle a user's throughput to dial-up speeds after a certain "invisible wall" is hit (usually around 200 MB a day). This FAP usually lasts for 24 hours after the wall is hit, and a user's throughput is restored to whatever tier they paid for. This makes bandwidth-intensive activities nearly impossible to complete in a reasonable amount of time (examples include P2P and newsgroup binary downloading).

Advantages
1. True global broadband Internet access availability
2. Mobile connection to the Internet (with some providers)

Disadvantages1. Very high latency compared to other broadband services, especially 2-way satellite service
2. Unreliable: drop-outs are common during travel, inclement weather, and during sunspot activity
3. The narrow-beam highly directional antenna must be accurately pointed to the satellite orbiting overhead
4. The Fair Access Policy limits heavy usage
5. VPN use is discouraged, problematic, and/or restricted with satellite broadband, although available at a price
6. One-way satellite service requires the use of a modem or other data uplink connection 7. VoIP is not supported.
8. Satellite dishes are huge. Although most of them employ plastic to reduce weight, they are typically between 80 and 120 cm (30 to 48 inches) in diameter.